Vacuum Cleaner Tune-Ups: $69.95-$129.95
(90 day warranty on parts and labor)
Most vacuum dealers advertise tune-ups to promote their businesses and to remind operators that servicing their vacuum cleaner is important. The belt needs to be changed at least once a year. The belt need not be broken to be ineffective. 80% of the performance is derived from agitation. Most vacuum cleaners use a rubber belt to spin the brush roll. The belt tension determines how aggressive the brush roll will agitate the carpet. There's a good deal of heat generated from the motor pulley and brush roll pulley produced by brush roll friction with the carpet. The heat relaxes the rubber and the belt eventually adopts the shape into which it has been stretched. The old belt stretches and slips resulting in less agitation. Agitation is needed to dig the embedded dirt and break the seal between the vacuum cleaner rug plate and the carpet to produce air flow. Installing a new belt will renew the
airflow. Change the vacuum bag or filter at the same time.
Tune-Up Procedure: Remove the rug plate (brush roll cover) to replace the belt. Now you can remove the brush roll. Clean the brush roll, removing the thread, carpet yard, hair, and string that crush the brushes. Remove the end caps and clean the hair and debris from under the caps and around the bearings and bushings. Clean or replace the bearings or lubricate them as needed. Get some "Crazy Clean" to clean the grime from the brush roll cylinder. "Crazy Clean" the brush roll housing and the rug plate. Now your ready to install the new belt. Loop the belt around the motor pulley, loop it around the brush roll and then press the brush roll into its position in the agitator housing. Replace the rug plate and you're ready to vacuum. Remember, "a new broom sweeps clean." Well, your broom is not new but for $69.95 it will clean as good as new. Regular Tune-Ups will provide other benefits as well. This yearly service can prevent repair incidents, extend the life of your carpet and improve the appearance of your home. The right vacuum cleaner will reduce collateral dusting. Have your dealer test your vacuum cleaner exhaust emissions during your tune-up visit. This test will reveal whether or not your
vacuum cleaner is a "vacuum cleaner or vacuum dirtier". NOTE: Ask your dealer about vacuum cleaners that don't require belt changes.
The Cost of Vacuum Cleaner Repair: $ ?
A Vacuum Cleaner Tune-Up is valuable maintenance but it will not entirely prevent repair incidents. Running over a cord, chewing up the insulation, is a repair that may require a cord replacement. A Broken pile selector, broken handle release lever, broken handle, broken wheels, worn bag assembly, worn dirt cup seals, damaged brush roll housing, broken motor fan, obstructions in the fill tube (clogged hoses), broken cord reels and damaged circuit boards are all examples of failures that may result in a repair expense. Replacing worn parts will extend the life of your vacuum cleaner but it will not guarantee it to have a "new life". The dealer can repair what's needed and will supply a guarantee on the parts replaced and the work needed to make that repair. Normally, a Tune-Up is performed during this process. It is always important that you get a firm estimate from your dealer prior to the repair being completed. The estimate is a time consuming process and requires the dealer to find a solution without actually making the repair. An experienced dealer will have a good idea what the solutions are. He can give you a price range and he will require your approval before he proceeds. Now that you know the approximate cost of the repair, you may want to ask the dealers' opinion regarding the value of the repair versus replacing the vacuum cleaner with a new one. The dealer will give you an honest evaluation of making an investment in the repair and can supply you with a Trade-In value should you decide that maybe you'd like something new. Keep in mind, the Trade-In value will reflect the resale value with the dealer footing the cost for refurbishing plus the dealer must supply the new owner with a guarantee of some type. Napa Sew & Vac offers a 90 day warranty on your repair plus we will provide a 30 day grace period during which time you can return your repaired vacuum cleaner and receive your repair cost plus an additional $10 trade-in credit toward your new machine purchase. Napa Sew & Vac offers a 30 day money back guarantee and free 90 days same as cash financing available. We take visa, mastercard, american express and debit cards. Financing by American General.
Serger Tune-Ups: $129.95 - $189.95 (90 day warranty on labor)
Serger Tune-Ups involve an analysis of the thread and fabric handling mechanisms and tension assemblies. It includes an air cleaning of head interior, exterior and tension cleaning. Serger stitch quality is examined, skipping or dropping stitches and breaking thread. The tune-up procedure includes threading and a sewing performance test. Machine problems are assessed, like damaged needle plates, broken or blemished looper, angular position of upper and lower loopers, looper and feed timing. Parts replacement charges are assessed and supplied to the customer prior to replacement unless the customer has already approved. Additional charges are levied for timing adjustment and looper or needle bar replacement and repair. A compelete estimated of peripheral labor charges will be supplied prior to repair, if not already approved. An additional $65 labor charge will be assessed should the machine require a chemical head cleaning.
Commercial Sewing Machine Shop Service: $189
Commercial or Industrial Sewing machines are generally suffering from a break down. The machine is not sewing, skipping stitches, breaking thread or is sewing badly. This bench charge enables the mechanic to analyze the condition and make corrections to eliminate the problem. Damaged or missing parts are assessed and charged if installed, pending customer approval. If major repair is required, like changing a timing belt or replacing a hook, a repair estimate will be produced and the repair will not be complete without the customer's approval.
Commercial On-Site Service: $169.00 - 1 hour labor included, additional is $85 per hour.
On-Site service is preferred for customers not able to extract the head and bring it to the shop for repair. We have accommodating service that brings the mechanic to the machine. Many problems are solved with the On-site visit and $169 is collected for this service. If the problem cannot be solved with the On-Site minimum call charge, the machine is extracted and an additional $189 shop bench charge is assessed. If the shop bench charge won't cover required repairs needed, an estimate is produced and the customer is called for approval prior to the repair being performed.
Sewing Machine Tune-Ups: $89.95-$169.95 (90 day warranty)
Service includes complete diagnostics, delinting, air cleaning, inspection and adjustment of all thread and fabric handling mechanisms, upper and lower tension adjustments, belt, bobbin winder and clutch adjustments, oil, lubrication and electrical inspection. If additional repair is required, a detailed estimate will be prepared for no extra charge.
Chemical Head Cleaning: $85
Oil viscosity diminishes over time leaving behind a gummy tar like residue. A chemical head cleaning removes residual tarnish restoring bushings to "like new". Needle bars, hand wheels, motors and bobbin winders are common victims of "oil gum-up". A machine can literally "freeze-up" as a result of oil coagulation. These oil solids can be dissolved using a detergent solution or solvent. Many machines suffer from symptoms and can easily be diagnosed. This problem is common with specific models and can be easily ascertained by an experienced technician. By assessing a "flat" charge, it enables the mechanic to effectively implement the cleaning procedure during the tune-up process. This service is only combined with a tune-up service and not available as an independent service.
Household Machine Home Service Calls: $85.00
The home service is designed for customers who can't or do not want to remove the sewing machine for repair or service. We make many home service calls and can solve many problems without having to bring the into the shop. When deeper repair is needed, we will remove the head or return the entire unit for a shop visit. A shop visit repair estimate will be produced prior to removing the machine. We generally recommend a shop visit for machines requiring a deep cleaning, gear changes or rewiring.
Rush Charge: $10.50
ANYONE CAN REQUEST A "RUSH". Service by Appointment, "Service While-U-Wait" or "Same Day Service" is available for a $10.50 "RUSH" charge, depending on staffing and store traffic. The "RUSH" fee is added to the flat rate service charge or added to the repair estimate as an additional charge. The service will be completed within time frame agreed unless needed parts are not available. In such cases, a repair estimate will be produced and the rush fee will not be levied.
Host Dry Carpet Cleaning
We became acquainted with HOST while confronting problems and complaints about wet extraction cleaning methods. While attending a sewing machine seminar at the Emeryville Hyatt, we were taking a break and observed this system being used by the maintenance staff. Our inquiry led to our own HOST distributorship. The process is simple, there are no chemicals to mix. The HOST cleaning material comes in a sealed foil pouch. It is slightly moist material, saturated with a specially formulated cleaning solution. The product is made by Racine Industries in Racine WI. They use a material contrived from a ground corn husk which carries the cleaning material through the carpet pile using a machine resembling a pile lifter. As the brushes spin, it spreads HOST through the carpet. Acting like tiny little sponges, it absorbs dirt and residue. Upon completion, the HOST is removed by vacuuming. The carpet is dry and ready to use. Any material left behind by the initial vacuuming will be removed by subsequent vacuuming. This system is effective on most spots and can be used with a spotting brush for intermittent maintenance. HOST is completely safe and biodegradable.