The Miele KWF 2000 IntensiveClear 2.0 Water Filter (Material Number 11480330) is an active charcoal filter designed to improve water quality and ensure flavorless ice cubes by removing suspended particles and odors from tap water. Records show you recently processed a payment for two of these filters on April 1, 2026.Compatibility and Usage
- Appliance Fit: This filter is specifically designed for use with Miele MasterCool refrigerators, including series F 2xx2, KF 2xx2, and KFMC 3xxx.
- Replacement Cycle: Miele recommends replacing the filter every 6 months or after approximately 250 gallons of use to maintain optimal performance.
- Design: The filter is white, weighs approximately 0.64 ounces (0.29 kg), and uses active charcoal as the primary filtration media.
Installation and Maintenance Steps:
- Locate and Remove: Find the filter housing (typically inside the fridge or behind a cover). Rotate the old filter counterclockwise to the 6:00 position and pull it out.
- Transfer Cap: Detach the filter cap from the old unit by depressing the side tabs and snap it onto the new filter.
- Insert and Lock: Insert the new filter with the handle at the 6:00 position and rotate clockwise until it stops and alignment marks match.
- Flush and Reset: Run the water dispenser for about 5 minutes to clear air and impurities, and discard any ice produced in the first 24 hours. Finally, reset the filter light in your refrigerator's settings menu.
Product Information
IntensiveClear 2.0 Water filter with active charcoal for MasterCool F 2xx2 and KF 2xx2
|
11480330
|
Intensive Clear 2.0 |
$189.00
|
units | |||
|
Gross weight per units: 0.33 kilogram
Packaging size: 210mm x 50mm x 50mm
EAN: 4002516307846
|
||||||
