The Center Guide foot is used for lining up the center of a two or three needle stitch with a previously sewn seam. This attachment is especially useful on sportswear and allows you to tack down already sewn seams, give extra strength to seams that come under strain, or simply give a finished decorative effect.
Center Guide Foot 3-Needle | Part Number : 795819108This accessory works with the following models:
The center guide foot for the CoverPro Cover Stitch Machine is useful in lining up and tacking down a previously sewn seam or finishing a seam with a decorative effect. It is especially useful in sportswear finishing such as around a neckband or through the seams of t-shirts for extra durability. While this is not used in some mass manufacturing, you can find this finish in more expensive, high end sportswear as it increases the life and value of a garment. If you would like more information on t-shirt construction, check out our other videos by searching CoverPro Cover Stitch in YouTube. You may also purchase this video which explains knitwear construction using Janome's CoverPro Cover Stitch machine and the additional attachments including the tape binding foot, center guide foot, clearview cover stitch, and hem guide foot. Ask your Janome dealer for BSCPROACC or contact us Monday through Friday 8:30AM -- 5:00PM EST, 1-800-631-0183, ext. 774
Janome USA - C...The center guide foot for the CoverPro Cover Stitch Machine is...
How to Use the...http://www.kenssewingcenter.com/janome-center-guide-foot-for-9...
Janome CoverPr...Janome CoverPro Series 1000CP/900CP